Product Details:
Payment & Shipping Terms:
|
Product: | Damp Proof Hot Stamping PVC Wood Panels Size 8 Inch Wide 7mm Thick | Size: | 200*7mm |
---|---|---|---|
Weight: | 1.9kg, 2.2kg, 2.3kg Per Sqm | Surface: | Wood Hot Stamping |
Shape: | Flat | Feature: | Damp Proof |
High Light: | pvc interior wall panels,plastic wall liner panels |
Damp Proof Hot Stamping PVC Wood Panels Size 8 Inch Wide 7mm Thick
Hot Stamping PVC Wood Panels Introduction:
Product Type
|
PVC ceiling and wall panels | ||
Raw Materials
|
PVC, Calcium Carbonate | ||
Brand Name
|
Oasis or OEM | ||
Specification
|
Width
|
200mm | |
Thickness
|
7mm | ||
Length
|
5.95m, or according to your requirements |
||
Surface treatment
|
Wooden printing | ||
Application
|
Hotels, hospitals, schools, kitchens, washing rooms, office, and other indoor ceiling and wall decoration |
Hot Stamping PVC Wood Panels Advantages:
(1) Water Resistant: PVC panels are very popular in the bathroom and kitchen areas as they are water-repellent and mould resistant. It can also be used all over the house.
(2) Budget-friendly: It is far more economical as compared to wood, paint, tiles and wall papers.
(3) Hygienic: PVC panels provide a very clean and hygienic for wall and ceiling decoration. Once installed, there is no grout to go dirty. PVC is mould-repellent and not a suitable material for bacterial growth.
(4) Low maintenance: PVC panels require only a low maintenance , and when you want to clean them , it does not take you long. Due to the smooth surface of the panels, dirt does not gather in pores or cracks. A simple cloth will do to clean the surface. Do not use chlorinates or abrasive agents.
(5) Recyclable: PVC panels are 100% recyclable. They can be taken to any plastic recycling center. NO further finishing or care required after installation - no paint , no lack, no varnish.
Hot Stamping PVC Wood Panels Fire Test Report:
Report No. | V03-1300150 | Specification | 200×7 mm | ||||
Product | PVC Wall Panel | Standard | BS EN 13501-1:2007 | ||||
Test Items | Measure Unit | Technical Requirement | Test Results | Individual Judgment | |||
Fire growth rate index (Figra) |
W/s | C | ≤250 | 105 | Compliant | ||
Lateral flame spread ( LFS) |
m | <edge of specimen | Yes | Compliant | |||
Total heat release within 600 s(THR 600s) |
MJ | ≤15 | 11.5 | Compliant | |||
Flame spread (Fs) |
Surface | mm | ≤150 | 30 | Compliant | ||
Edge | 33 | Compliant | |||||
Smoke growth rate (SMOGRA) |
m2/s2 | S2 | ≤180 | 192 |
S3 Compliant |
||
Total smoke production within 600 s(THR 600s) |
m2 | ≤200 | 666 | ||||
Flaming droplests/particles | ------ | d0 |
No flaming droplets/particles occur within 600s |
Yes | Compliant | ||
Ignition of the filter paper | ------ | No ignition of the filter paper | Yes | Compliant | |||
Conclusion |
The combustion performance of sample is satisfied BS EN 13501-1:2007 about grade C-s3,d0. |
Hot Stamping PVC Wood Panels Installation Procedure:
(1) Preparing all the necessary tools
(2) Measuring the size of panel you need to cut
(3) Cutting the panel by blade or jigsaw
(4) Fixing the kill
(5) Install the corner or jointer
(6) Install the panel into the corner
(7) Fixing the panel by staple nail gun on the keel
(8) Insert the second panel completely into the groove before stapling (nailing or screwing) into the lip. Proceed the same way with the next panels.
Hot Stamping PVC Wood Panels Pictures:
Contact Person: Miss. Abby
Tel: 86-18357305069
Fax: 86-573-8780-5310